Thermal fatigue behavior of new ceramic thermal barrier coatings obtained by the atmospheric plasma spray process

Main Article Content

Autores

Pablo Carpio
María Dolores Salvador-Moya
Amparo Borrell
Enrique Sánchez

Abstract

The development of new ceramic materials to protect the metallic components against corrosion and oxidation at high temperature, also known as thermal barriers coating (TBC), is of a great interest topic for many industrial and consumer sectors, such as energy generation, aeronautics and automotive industries.

This paper carried out a study on the thermal fatigue behavior of the bond coat, by centering the answer in one of the components which constitute a TBC: the anchor coat. The different TBC components were deposited by an Atmospheric Plasma Spraying (APS) Technique. Microstructure and anchor coat composition along the thermal cycles were studied.

Keywords:

Article Details

Licence

All articles included in the Revista Facultad de Ingeniería are published under the Creative Commons (BY) license.

Authors must complete, sign, and submit the Review and Publication Authorization Form of the manuscript provided by the Journal; this form should contain all the originality and copyright information of the manuscript.

The authors who publish in this Journal accept the following conditions:

a. The authors retain the copyright and transfer the right of the first publication to the journal, with the work registered under the Creative Commons attribution license, which allows third parties to use what is published as long as they mention the authorship of the work and the first publication in this Journal.

b. Authors can make other independent and additional contractual agreements for the non-exclusive distribution of the version of the article published in this journal (eg, include it in an institutional repository or publish it in a book) provided they clearly indicate that the work It was first published in this Journal.

c. Authors are allowed and recommended to publish their work on the Internet (for example on institutional or personal pages) before and during the process.
review and publication, as it can lead to productive exchanges and a greater and faster dissemination of published work.

d. The Journal authorizes the total or partial reproduction of the content of the publication, as long as the source is cited, that is, the name of the Journal, name of the author (s), year, volume, publication number and pages of the article.

e. The ideas and statements issued by the authors are their responsibility and in no case bind the Journal.

References

W. Q. Wang, C. K. Sha, D. Q. Sun et al., “Microstructural feature, thermal shock resistance and isothermal oxidation resistance of nanostructured zirconia coating”, Mater. Sci. Eng. A, vol. 424 (1-2), pp. 1-5, May. 2006. DOI: http://dx.doi.org/10.1016/j.msea.2005.10.025.

N. K. Huang, “X-ray photoelectron spectroscopy studies on the surface of NiCoCrAlY coatings before and after high-temperature oxidation”, Surf. Coat. Technol., vol. 53 (1), pp. 65-69, Jul. 1992. DOI: http://dx.doi.org/10.1016/0257-8972(92)90104-I.

B. G. Mendis and K. J. Hemker, “Thermal stability of microstructural phases in commercial NiCoCrAlY bond coats”, Scr. Mater., vol. 58 (4), pp. 255, Feb. 2008. DOI: http://dx.doi.org/10.1016/j.scriptamat.2007.10.016.

J. M Guilemany. J. Fernández, J. Navarro et al., “Obtención de recubrimientos autolubricados por proyección térmica de plasma atmosférico (APS) como alternativa a los lubricantes líquidos”, Bol. Soc. Esp. Ceram. Vidr., vol. 44 (4), pp. 211-214, Aug. 2005. DOI: http://dx.doi.org/10.3989/cyv.2005.v44.i4.376.

P. Fauchais, G. Montavon, and G. Bertrand, “From Powders to Thermally Sprayed Coatings”, Therm. Spray Technol., vol. 19 (1-2), pp. 56-80, Jan. 2010. DOI: http://dx.doi.org/10.1007/s11666-009-9435-x.

M. Gel, E. H. Jordan, Y. H. Sohn et al., “Development and implementation of plasma sprayed nanostructured ceramic coatings”, Surf. Coat. Technol., vol. 146-147, pp. 48-54, Sep. 2001. DOI: http://dx.doi.org/10.1016/S0257-8972(01)01470-0.

R. S. Lima and B. R. Marple, “Thermal spray coatings engineered from nanostructured ceramic agglomerated powders for structural, thermal barrier and biomedical applications: A review”, J. Therm. Spray Technol., vol. 16 (1), pp. 40-63, May. 2007. DOI: http://dx.doi.org/10.1007/s11666-006-9010-7.

P. Carpio, E. Bannier, A. Borrell et al., “Influencia de los parámetros de proyección por plasma atmosférico en recubrimientos de YSZ obtenidos a partir de polvos micro y nanoestructurados”, Bol. Soc. Esp. Ceram. Vidr., vol. 53 (4), pp 162-170, Aug. 2014. DOI: http://dx.doi.org/10.3989/cyv.202014.

D. Schwingel, R. Taylor, T. Haubold et al., “Mechanical and thermophysical properties of thick PYSZ thermal barrier coatings: correlation with microstructure and spraying parameters”, Surf. Coat. Technol., vol. 108-109, pp. 99-106, Oct. 1998. DOI: http://dx.doi.org/10.1016/S0257-8972(98)00628-8.

Downloads

Download data is not yet available.