Diseño y generación de transmisiones de potencia por correa trapecial en Solidworks mediante una aplicación en Visual Basic

Aeljandro Ozaeta Eidelman; Luis Carlos Flórez García; Oscar Fabián Higuera Cobos

doi:10.19053/01211129.2513

Vol. 22 No. 35 (2013)

Papers

Diseño y generación de transmisiones de potencia por correa trapecial en Solidworks mediante una aplicación en Visual Basic

https://doi.org/10.19053/01211129.2513

Published 2013-07-05

Aeljandro Ozaeta Eidelman
Luis Carlos Flórez García
Oscar Fabián Higuera Cobos

How to Cite

Ozaeta Eidelman, A., Flórez García, L. C., & Higuera Cobos, O. F. (2013). Diseño y generación de transmisiones de potencia por correa trapecial en Solidworks mediante una aplicación en Visual Basic. Revista Facultad De Ingeniería, 22(35), 35–46. https://doi.org/10.19053/01211129.2513

Download Citation

All articles included in the Revista Facultad de Ingeniería are published under the Creative Commons (BY) license.

Authors must complete, sign, and submit the Review and Publication Authorization Form of the manuscript provided by the Journal; this form should contain all the originality and copyright information of the manuscript.

The authors who publish in this Journal accept the following conditions:

a. The authors retain the copyright and transfer the right of the first publication to the journal, with the work registered under the Creative Commons attribution license, which allows third parties to use what is published as long as they mention the authorship of the work and the first publication in this Journal.

b. Authors can make other independent and additional contractual agreements for the non-exclusive distribution of the version of the article published in this journal (eg, include it in an institutional repository or publish it in a book) provided they clearly indicate that the work It was first published in this Journal.

c. Authors are allowed and recommended to publish their work on the Internet (for example on institutional or personal pages) before and during the process.
review and publication, as it can lead to productive exchanges and a greater and faster dissemination of published work.

d. The Journal authorizes the total or partial reproduction of the content of the publication, as long as the source is cited, that is, the name of the Journal, name of the author (s), year, volume, publication number and pages of the article.

e. The ideas and statements issued by the authors are their responsibility and in no case bind the Journal.

Abstract

Se presenta el procedimiento de diseño de transmisiones de potencia por correa trapecial según la norma BS 3790, mediante una aplicación desarrollada en Microsoft Visual Studio 2008 y utilizando el lenguaje de programación Visual Basic. El programa utiliza los parámetros de operación de la transmisión ingresada por el usuario, y mediante los cálculos estandarizados y una base de datos conformada por diversos catálogos de poleas y correas, muestra todas las transmisiones que satisfacen los requerimientos ingresados, además, permite la generación del modelo sólido de cada transmisión en SolidWorks.

PDF (Español)

Downloads

Download data is not yet available.

		Fuente Academica Premier

		(Categoría B)