Anticorrosive evaluation of Sio2-Tio2-Zro2 ceramic trilayers synthesized by the Sol-Gel method

Authors

  • Jorge Hernando Bautista Ruiz Universidad Pedagógica y Tecnológica de Colombia
  • César Armando Ortiz Otálora Universidad Pedagógica y Tecnológica de Colombia

Keywords:

corrosion, sol-gel, electrochemical techniques

Abstract

The conformation of trilayers of ceramic coatings of the SiO2-TiO2-ZrO2 system is shown, synthesized by the Sol-gel method, using Si (OC2H5) 4, Ti (OBu) 4 and Zr (OC3H7) 4 as precursors, as EtOH and water, and as a complexing agent 2,4 pentanedione. The ceramic coatings were deposited on AISI / SAE 304 stainless steel substrates using the dip-coating technique. The influence of the coatings on the anticorrosive behavior of the substrate in a 3% HCl solution was studied using Electrochemical Impedance Spectroscopy (EIS) techniques and potentiodynamic polarization curves. Additionally, a morphological study was performed using the Atomic Force Microscopy (AFM) technique. The values of the electrochemical parameters were found to change substantially with the concentration of the precursors added to the effects of the film on the substrate.

Downloads

Download data is not yet available.

Author Biographies

Jorge Hernando Bautista Ruiz, Universidad Pedagógica y Tecnológica de Colombia

Físico. Estudiante de Maestría Universidad Pedagógica y Tecnológica de Colombia. Grupo de Investigación en Superficies Electroquímicay Corrosión –GSEC–.

César Armando Ortiz Otálora, Universidad Pedagógica y Tecnológica de Colombia

Máster. Físico. Docente Escuela de Física, Universidad Pedagógica y Tecnológica de Colombia. Grupo de Investigación en Superficies Electroquímica y Corrosión –GSEC–.

References

N.A.

Downloads

Published

2009-06-17

How to Cite

Bautista Ruiz, J. H., & Ortiz Otálora, C. A. (2009). Anticorrosive evaluation of Sio2-Tio2-Zro2 ceramic trilayers synthesized by the Sol-Gel method. Revista Facultad De Ingeniería, 16(22), 43–48. Retrieved from https://revistas.uptc.edu.co/index.php/ingenieria/article/view/1339

Issue

Vol. 16 No. 22 (2007)

Section

Papers

License

All articles included in the Revista Facultad de Ingeniería are published under the Creative Commons (BY) license.

Authors must complete, sign, and submit the Review and Publication Authorization Form of the manuscript provided by the Journal; this form should contain all the originality and copyright information of the manuscript.

The authors who publish in this Journal accept the following conditions:

a. The authors retain the copyright and transfer the right of the first publication to the journal, with the work registered under the Creative Commons attribution license, which allows third parties to use what is published as long as they mention the authorship of the work and the first publication in this Journal.

b. Authors can make other independent and additional contractual agreements for the non-exclusive distribution of the version of the article published in this journal (eg, include it in an institutional repository or publish it in a book) provided they clearly indicate that the work It was first published in this Journal.

c. Authors are allowed and recommended to publish their work on the Internet (for example on institutional or personal pages) before and during the process.
review and publication, as it can lead to productive exchanges and a greater and faster dissemination of published work.

d. The Journal authorizes the total or partial reproduction of the content of the publication, as long as the source is cited, that is, the name of the Journal, name of the author (s), year, volume, publication number and pages of the article.

e. The ideas and statements issued by the authors are their responsibility and in no case bind the Journal.

Metrics

Most read articles by the same author(s)