Design and modeling of a virtual PA-10 robot for surgical applications

Authors

  • Carlos Eduardo Fernández-Riomalo Universidad del Cauca (Cauca – Popayán, Colombia).
  • Héctor Andrés Guástar-Morillo Universidad del Cauca (Cauca – Popayán, Colombia).
  • Oscar Andrés Vivas-Albán Universidad del Cauca (Cauca – Popayán, Colombia).

DOI:

https://doi.org/10.19053/01211129.4627

Keywords:

maparoscopic, modeling robot, surgical robotics, surgical simulator virtual robot

Abstract

This paper shows the implementation of a PA-10 Mitsubishi robot on a surgical virtual simulator for laparoscopic surgeries by using surgical assistant robots. For the proposed simulator three robots are necessary: An endoscope-holder robot (in this case the Hibou robot), and two surgical robots (in this case a Lapbot robot and the designed PA-10 robot). The three robots are manipulated by a joystick device on a gallbladder ablation exercise (cholecystectomy). Deformation algorithms are included to provide greater realism, when the end-effector of the robot collides with the PA-10 virtual robot, abdominal organ. Results provide the base of a surgical virtual simulator using three assistant robots on a common laparoscopic surgical exercise, that can be used for training new surgeons.

Downloads

Download data is not yet available.

References

R. Mishra, S. Wexner and R. Green, Textbook of Practical Laparoscopy Surgery. New Delhi: Jaypee Brothers Medical Publishers, 2013. DOI: http://dx.doi.org/10.5005/jp/books/11753. DOI: https://doi.org/10.5005/jp/books/11753

P. Escobar and T. Falcone, Atlas of Single-Port, Laparoscopic, and Robotic Surgery: A Practical Approach in Gynecology. New York: Springer New York, 2014. DOI: http://dx.doi.org/10.1007/978-1-4614-6840-0. DOI: https://doi.org/10.1007/978-1-4614-6840-0

G. H. Ballantyne and F. Molle, “The Da Vinci telerobotic surgical system: the virtual operative field and telepresence surgery”, Surgical Clinics of North America, vol. 83 (6), pp. 1293-1304, Dec. 2003. DOI: http://dx.doi.org/10.1016/S0039-6109(03)00164-6. DOI: https://doi.org/10.1016/S0039-6109(03)00164-6

R. Smith and M. Truong, Simulation in Robotic Surgery: a comparative review of simulators of the da Vinci surgical robot. Oviedo, FLA: Modelbenders Press, 2013.

R. Polet and J. Donnez, “Using a laparoscope manipulator (Lapman) in laparoscopic gynecological surgery”, Surgical Technology International, vol. 17, pp. 187-191, 2008.

S. Kommu P. Rimington, C. Anderson and A. Rané, “Initial experience with the EndoAssist camera-holding robot in laparoscopic urological surgery”, Journal of Robotic Surgery, vol. 1 (2), pp. 133-137, Jul. 2007. DOI: http://dx.doi.org/10.1007/s11701-007-0010-5. DOI: https://doi.org/10.1007/s11701-007-0010-5

B. Kraft, C. Jäger, K. Kraft and R. Bittner, “The Aesop robot system in laparoscopic surgery: increased risk or advantage for surgeon and patient?”, Surgical Endoscopy, vol. 18 (8), pp. 1216-1223, Aug. 2004. DOI: http://dx.doi.org/10.1007/s00464-003-9200-z. DOI: https://doi.org/10.1007/s00464-003-9200-z

J. Justo, A. Pedroza, E. Prado et al., “Un nuevo simulador de laparoscopia”, Medigraphic Artemisa, vol. 75 (1), pp. 19-23, Jan. – Feb. 2007.

J. García, M. Arias and E. Valencia, “Diseño de prototipo de simulador para entrenamiento en cirugía laparoscópica”, Revista Ingeniería Biomédica, vol. 5 (9), pp. 13-19, Jan. – Jun. 2011.

S. Sanz, F. Sánchez, I. Díaz and J. Usón, “Validación preliminar del simulador físico Simulap® y de su sistema de evaluación para cirugía laparoscópica”, Cirugía Española, vol. 90 (1), pp. 38-44, Jan. 2012. DOI: http://dx.doi.org/10.1016/j.ciresp.2011.07.013. DOI: https://doi.org/10.1016/j.ciresp.2011.07.013

T. Matsuda, Y. Ono, S. Baba et al., “Positive correlation between motion analysis data on the Lapmentor virtual reality laparoscopic surgical simulator and the results from video tape assessment of real laparoscopic surgeries”, The Journal of Urology, vol. 179 (4), p. 661, Apr. 2008. DOI: http://dx.doi.org/10.1016/S0022-5347(08)61930-8. DOI: https://doi.org/10.1016/S0022-5347(08)61930-8

A. Rolls, C. Riga, C. Bicknell et al., “A pilot study of video-motion analysis in endovascular surgery: Development of real-time discriminatory skill metrics”, European Journal of Vascular and Endovascular Surgery, vol. 45 (5), pp. 509-515, May. 2013. DOI: http://dx.doi.org/10.1016/j.ejvs.2013.02.004. DOI: https://doi.org/10.1016/j.ejvs.2013.02.004

S. Patel, C. Radia, S. Bains and R. Varma, “WII Trauma Centre VS. LapSim: Are modern game consoles comparable to simulators for the development of laparoscopic skills?”, International Journal of Surgery, vol. 11 (8), p. 598, Oct. 2013. Sapna Patel, Chandni Radia, Sonia Bains, Rajesh Varma. DOI: http://dx.doi.org/10.1016/j.ijsu.2013.06.062. DOI: https://doi.org/10.1016/j.ijsu.2013.06.062

W. Brinkman, J. Luursema, B. Kengen et al., “Da Vinci skills simulator for assessing learning curve and criterion-based training of robotic basic skills”, Urology, vol. 81 (3), pp. 562-566, Mar. 2013. DOI: http://dx.doi.org/10.1016/j.urology.2012.10.020. DOI: https://doi.org/10.1016/j.urology.2012.10.020

D. Guzmán and A. Vivas, “Software para la práctica de la robótica quirúrgica”, Ingeniería y Universidad, vol. 19 (1), pp. 7-25, Jan. – Jun. 2015. DOI: http://dx.doi.org/10.11144/Javeriana.iyu19-1.sprq. DOI: https://doi.org/10.11144/Javeriana.iyu19-1.sprq

S. Salinas and A. Vivas, “Modelado, simulación y control del robot para cirugía laparoscópica Lapbot”, Revista Chilena de Ingeniería, vol. 17 (3), pp. 317-328, Dec. 2009. DOI: http://dx.doi.org/10.4067/s0718-33052009000300005. DOI: https://doi.org/10.4067/S0718-33052009000300005

V. Torres, C. Méndez, A. Vivas and S. Salinas, “Diseño y simulación en 3D de un robot porta endoscopio para operaciones de laparoscopia”, en V Seminario Internacional de Ingeniería Electrónica, Bucaramanga, Colombia, Sep. 2011.

C. W. Kennedy and J. P. Desai, “Modeling and control of the Mitsubishi PA10 robot arm harmonic drive system”, IEEE ASME Transactions on Mechatronics, vol. 10 (3), pp. 263-274, Jun. 2005. DOI: http://dx.doi.org/10.1109/TMECH.2005.848290. DOI: https://doi.org/10.1109/TMECH.2005.848290

N. Bompos, P. Artemiadis, A. Oikonomopoulos and K. Kyriakopoulos, “Modeling, full identification and control of the mitsubishi PA-10 robot arm”, IEEE/ASME International Conference on Advanced Intelligent

Mechatronics, Zurich (Switzerland), pp. 1-6, Sep. 2007. DOI: http://dx.doi.org/10.1109/aim.2007.4412421. DOI: https://doi.org/10.1109/AIM.2007.4412421

E. Dombre and W. Khalil, Modeling, Performance Analysis and Control of Robot Manipulators. London: Wiley, 2010.

B. Garcés, O. Mora and A. Vivas, “Estudio del uso de robots industriales como asistentes en operaciones de laparoscopia”, Revista Facultad de Ingeniería Universidad de Antioquia, n° 47, pp. 91-102, Mar. 2009.

K. Levenberg, “A method for the solution of certain nonlinear problems in least squares”, Quarterly of Applied Mathematics, vol. 2, pp. 164-168, 1944. DOI: https://doi.org/10.1090/qam/10666

A. Vivas, Diseño y Control de Robots Industriales: Teoría y Práctica. Buenos Aires: Elaleph, 2010.

R. Gómez and F. Montero, “Visualización y deformación de objetos virtuales 3d”, Tesis de grado, Ingeniería en Automática Industrial, Universidad del Cauca, Colombia, 2012.

Published

2016-05-03

How to Cite

Fernández-Riomalo, C. E., Guástar-Morillo, H. A., & Vivas-Albán, O. A. (2016). Design and modeling of a virtual PA-10 robot for surgical applications. Revista Facultad De Ingeniería, 25(42), 21–32. https://doi.org/10.19053/01211129.4627

Issue

Section

Papers

Metrics