Skip to main navigation menu Skip to main content Skip to site footer

Rock Wedge Stability Analysis by a Level III Reliability Method

Abstract

In fractured rock masses, discontinuities control the mechanical response of rock slopes. They even define the geometry of a potential failure, known a kinematically controlled failure. Hence, a proper characterization and description are needed to assess their stability. Accordingly, in this work, a reliability assessment of rock wedges' stability was performed by a Monte Carlo simulation. The orientation of discontinuities was modeled as a random variable that follows the rotationally symmetric Fisher distribution. We developed an algorithm to define the modes of failure based on the orientation of planes, which was articulated within a methodology to compute the factor of safety of rock wedges explicitly. The algorithm systematically defines a set-up of joint planes. Then it verifies the relative location of the slope orientation on that set-up, which is related to the mode of failure of the rock wedge. The proposed algorithm was validated by comparison against commercial software; both yielded the same results. Besides, the probability of failure and the factor of safety probability function of removable wedges were computed for different concentration parameters. Reliability assessment showed the importance of properly characterizing the variability of joint orientation since the concentration highly influences the computed probability of failure. In addition, a proper definition of removable wedges by kinematic analysis is required before computing the factor of safety because many combinations of planes do not lead to unstable wedges, which reduces the probability of failure. Otherwise, it is overestimated. Finally, we recommend further work on rock wedge reliability assessment involving rotational nonsymmetric distribution.

Keywords

Rock wedge, reliability assessment, Fisher distribution, Monte Carlo simulation

XML PDF

References

  1. R. E. Goodman, R. L. Taylor, “Methods Of Analysis For Rock Slopes And Abutments: A Review Of Recent Developments,” in The 8th U.S. Symposium on Rock Mechanics (USRMS), 1966. https://www.onepetro.org/conference-paper/ARMA-66-0303
  2. E. Hoek, J. W. Bray, J. M. Boyd, “The stability of a rock slope containing a wedge resting on two intersecting discontinuities,” Quarterly Journal of Engineering Geology and Hydrogeology, vol. 6, no. 1, pp. 1–55, 1973. https://doi.org/10.1144/GSL.QJEG.1973.006.01.01 DOI: https://doi.org/10.1144/GSL.QJEG.1973.006.01.01
  3. B. K. Low, Reliability of rock slopes with wedge mechanisms, Massachusetts Institute of Technology, 1979. http://dspace.mit.edu/handle/1721.1/70611
  4. B. K. Low, H. H. Einstein, “Simplified reliability analysis for wedge mechanisms in rock slopes,” in Proceeding of 6th International Symposium on Landslides, 1992, pp. 499–507.
  5. B. K. Low, “Reliability Analysis of Rock Wedges,” Journal of Geotechnical and Geoenvironmental Engineering, vol. 123, no. 6, pp. 498–505, Jun. 1997. https://doi.org/10.1061/(ASCE)1090-0241(1997)123:6(498) DOI: https://doi.org/10.1061/(ASCE)1090-0241(1997)123:6(498)
  6. B. K. Low, W. H. Tang, “Efficient reliability evaluation using spreadsheet,” Journal of Engineering Mechanics, vol. 123, no. 7, pp. 749–752, 1997. DOI: https://doi.org/10.1061/(ASCE)0733-9399(1997)123:7(749)
  7. R. Jimenez-Rodriguez, N. Sitar, “A spectral method for clustering of rock discontinuity sets,” International Journal of Rock Mechanics and Mining Sciences, vol. 43, no. 7, pp. 1052–1061, 2006. https://doi.org/10.1016/j.ijrmms.2006.02.003 DOI: https://doi.org/10.1016/j.ijrmms.2006.02.003
  8. Z. P. Xiao, Q. Lü, J. Zheng, J. Liu, J. Ji, “Conditional probability-based system reliability analysis for geotechnical problems,” Computers and Geotechnics, vol. 126, e103751, Oct. 2020. https://doi.org/10.1016/J.COMPGEO.2020.103751 DOI: https://doi.org/10.1016/j.compgeo.2020.103751
  9. A. P. Chapple, “An engineering geological investigation into pit slope stability at Macraes Gold Mine, Macraes Flat, Otago, New Zealand,” Master Thesis, University of Canterbury, 1998. https://ir.canterbury.ac.nz/handle/10092/9360
  10. H. Park, “Probabilistic Approach of Stability Analysis for Rock Wedge Failure,” Economic and Environmental Geology, vol. 33, no. 4, pp. 295–307, 2000.
  11. H. Park, T. R. R. West, “Development of a probabilistic approach for rock wedge failure,” Engineering Geology, vol. 59, no. 3–4, pp. 233–251, Apr. 2001. https://doi.org/10.1016/S0013-7952(00)00076-4 DOI: https://doi.org/10.1016/S0013-7952(00)00076-4
  12. H.-J. Park, T. R. West, I. Woo, “Probabilistic analysis of rock slope stability and random properties of discontinuity parameters, Interstate Highway 40, Western North Carolina, USA,” Engineering Geology, vol. 79, no. 3–4, pp. 230–250, Jul. 2005. https://doi.org/10.1016/j.enggeo.2005.02.001 DOI: https://doi.org/10.1016/j.enggeo.2005.02.001
  13. E. Hoek, J. C. Bray, Rock Slope Engineering, 2nd ed. CRC Press., 1981. DOI: https://doi.org/10.1201/9781482267099
  14. E. Z. Lajtai, B. J. Carter, “Geoslide--A computer code on the IBM PC for the analysis of rock slopes,” Grade Thesis, University of Manitoba, Canada, 1989.
  15. P. Feng, E. Z. Lajtai, “Probabilistic treatment of the sliding wedge with EzSlide,” Engineering Geology, vol. 50, no. 1-2, pp. 153-163, 1998. https://doi.org/10.1016/S0013-7952(98)00007-6 DOI: https://doi.org/10.1016/S0013-7952(98)00007-6
  16. S. Zuo et al., “Reliability back analysis of a 3D wedge slope based on the nonlinear Barton-Bandis failure criterion,” Engineering Failure Analysis, vol. 128, e105601, Oct. 2021. https://doi.org/10.1016/J.ENGFAILANAL.2021.105601 DOI: https://doi.org/10.1016/j.engfailanal.2021.105601
  17. L. Zhao, K. Jiao, D. Li, S. Zuo, “System reliability analysis of seismic pseudo-static stability of rock wedge based on nonlinear Barton—Bandis criterion,” Journal of Central South University, vol. 27, no. 11, pp. 3450–3463, Nov. 2020. https://doi.org/10.1007/S11771-020-4558-9/METRICS DOI: https://doi.org/10.1007/s11771-020-4558-9
  18. D. Deng, “Limit equilibrium analysis on the stability of rock wedges with linear and nonlinear strength criteria,” International Journal of Rock Mechanics and Mining Sciences, vol. 148, e104967, Dec. 2021. https://doi.org/10.1016/J.IJRMMS.2021.104967 DOI: https://doi.org/10.1016/j.ijrmms.2021.104967
  19. R. Jimenez-Rodriguez, N. Sitar, “Rock Wedge Stability Analysis Using System Reliability Methods,” Rock Mechanics and Rock Engineering, vol. 40, no. 4, pp. 419–427, Jul. 2006. https://doi.org/10.1007/s00603-005-0088-x DOI: https://doi.org/10.1007/s00603-005-0088-x
  20. N. I. I. Fisher, T. Lewis, J. Embleton, Statistical Analysis of Spherical Data, Australia: Press Syndicate of the University of Cambridge, 1987. DOI: https://doi.org/10.1017/CBO9780511623059
  21. S. D. Priest, Discontinuity analysis for rock engineering. Springer Science & Business Media, 1993. DOI: https://doi.org/10.1007/978-94-011-1498-1
  22. N. I. Norrish, D. D. Willey, “Rock Slope Stability Analysis,” in Landslides: Investigation and Mitigation - Special Report 247, Transportation Research Board, Ed. National Academy Press, 1996, pp. 391–424.
  23. JCSS, General principles: general principles on quality assurance for structures: general principles on reliability for structural design, International Association for Bridge and Structural Engineering, 1981.
  24. J. L. Peñuela Nieto, G. I. Beltrán Calvo, R. Hernández Carrillo, “Acquisition and Evaluation of Rock Mass Geometric Data from Three-Dimensional Images for use in Geotechnical Analysis,” Ingeciencia, vol. 15, no. 29, pp. 43–73, Jun. 2019. https://doi.org/10.17230/INGCIENCIA.15.29.2 DOI: https://doi.org/10.17230/ingciencia.15.29.2
  25. R. Hernández-Carrillo, “Reliability assessment of rock slopes by evidence theory,” Master Thesis, Universidad Nacional de Colombia, 2020. https://repositorio.unal.edu.co/handle/unal/78171

Downloads

Download data is not yet available.

Similar Articles

1 2 > >> 

You may also start an advanced similarity search for this article.