Simulación de la topografía superficial de un cilindrado con corte asistido por vibración

Luis Carlos Flórez-García; Hernán Alberto González-Rojas; Rámon Casado-López

doi:10.19053/01211129.2790

Vol. 23 No. 37 (2014)

Papers

Simulación de la topografía superficial de un cilindrado con corte asistido por vibración

https://doi.org/10.19053/01211129.2790

Published 2014-07-06

Luis Carlos Flórez-García
Hernán Alberto González-Rojas
Rámon Casado-López

Luis Carlos Flórez-García
Universidad Tecnológica de Pereira

Hernán Alberto González-Rojas
Universidad Politécnica de Cataluña

Rámon Casado-López
Universidad Politécnica de Cataluña

How to Cite

Flórez-García, L. C., González-Rojas, H. A., & Casado-López, R. (2014). Simulación de la topografía superficial de un cilindrado con corte asistido por vibración. Revista Facultad de Ingeniería, 23(37), 55–64. https://doi.org/10.19053/01211129.2790

Download Citation

Metrics

Views/Downloads

Abstract
588
PDF (Español)
546
HTML (Español)
1683

All articles included in the Revista Facultad de Ingeniería are published under the Creative Commons (BY) license.

Authors must complete, sign, and submit the Review and Publication Authorization Form of the manuscript provided by the Journal; this form should contain all the originality and copyright information of the manuscript.

The authors who publish in this Journal accept the following conditions:

a. The authors retain the copyright and transfer the right of the first publication to the journal, with the work registered under the Creative Commons attribution license, which allows third parties to use what is published as long as they mention the authorship of the work and the first publication in this Journal.

b. Authors can make other independent and additional contractual agreements for the non-exclusive distribution of the version of the article published in this journal (eg, include it in an institutional repository or publish it in a book) provided they clearly indicate that the work It was first published in this Journal.

c. Authors are allowed and recommended to publish their work on the Internet (for example on institutional or personal pages) before and during the process.
review and publication, as it can lead to productive exchanges and a greater and faster dissemination of published work.

d. The Journal authorizes the total or partial reproduction of the content of the publication, as long as the source is cited, that is, the name of the Journal, name of the author (s), year, volume, publication number and pages of the article.

e. The ideas and statements issued by the authors are their responsibility and in no case bind the Journal.

Metrics

Abstract

El corte asistido por vibración (CAV) es una técnica de mecanizado que brinda mejor acabado superficial, reduce fuerzas en el corte y aumenta la vida de la herramienta. Para predecir de forma geométrica la topografía de un cilindrado con CAV se ha construido un programa que simula la topografía superficial con el propósito de realizar barridos sobre la frecuencia de vibración, para observar el comportamiento de los parámetros superficiales Sa, St, Ra, Rt y de la topografía. Se ha podido observar que los parámetros superficiales tienen un comportamiento periódico, caracterizado por una frecuencia adimensional igual a 1.

PDF (Español) HTML (Español)

Downloads

Download data is not yet available.


Fuente Academica Premier

(Categoría B)

Abstract

Downloads

Most read articles by the same author(s)