Valuation of the Durability of the Concrete Used in the Precast Great Soviet Panel System
DOI:
https://doi.org/10.19053/01211129.v29.n54.2020.10486Keywords:
potential of corrosion, surface methods, ultrasonic pulse velocity, compression resistance, concrete system, humidity percentageAbstract
The durability of the concrete of the precast Great Soviet Panel system is valued through the resistance to compression, ultrasonic pulse velocity, surface methods, humidity and potential of corrosion. The evaluation is approached, essentially, through experimental and statistical methods, nevertheless, historical-logical and technical methods, such as surveys and interviews, are used in order to gather a bigger amount of information on the resistance to compression of the elements in the original project. While analyzing the results, we can conclude that, in elements in a good technical-constructive state that conform the constructions in exploitation, concrete has an average resistance. However, in elements with the presence of pathological damages, the resistance is low due to the fact that elements show chemical deterioration processes caused by water exposure, which generates the formation of soluble paste compounds, loss of mass, and decrease in mechanical resistance, among other alterations. At the same time, carbonation of concrete is triggered, which, in turn, causes the corrosion of the reinforcing steel. This corrosion leads to the cracking of concrete, delamination of steel, decrease of the concrete-steel adhesion, and other manifestations that affect the durability of concrete. Therefore, the incidence of the durability of concrete should be valued in the structural seismic behavior of constructions.
Downloads
References
A. Díaz, “Deterioro de la imagen de un conjunto habitacional en la periferia de la ciudad”, in IV Memorias del Evento Internacional Ciudad, Imagen y Memoria, Santiago de Cuba, Cuba, 2005, pp.14-29.
G. Morejón-Blanco, Y. Berenguer-Heredia, K. Leyva-Chang, D. Candebat-Sánchez, and A. Artímez-Numas, “Comportamiento estructural del sistema prefabricado Gran Panel Soviético a partir de las modificaciones realizadas por los habitantes ante sismos de gran magnitud,” Ciencias de la Tierra y el Espacio, vol. (15), pp. 85-96, Jun. 2014.
Federal Emergency Management Agency, FEMA 273-NEHRP Guidelines for the Seismic Rehabilitation of Buildings, 1997.
American Society of Civil Engineers, ASCE/SEI 7-05-Seismic Evaluation and Retrofit of Existing Buildings, 2013.
Gaceta Oficial del Distrito Federal, Normas para la Rehabilitación Sísmica de edificios de concreto dañados por el Sismo del 19 de septiembre, 2017. http://www.smie.org.mx/archivos/informacion-tecnica/reglamentos-construccion-mexico/ciudad-de-mexico/ciudad-de-mexico-normas-rehabilitacion-sismica-edificios-danados-2017.pdf
Normalización O. N. D., NC 318-Ensayos al Hormigón-Muestreo, preparación y ensayos de testigos al hormigón, 2015.
Normalización O. N. D., NC-724-Ensayos del Hormigón. Resistencia del Hormigón en Estado Endurecido, 2015.
R. Solís, “Predicción de la resistencia del concreto con base en la velocidad de pulso ultrasónico y un índice de calidad de los agregados,” Ingeniería, vol. 8, pp.41-52, May. 2004.
Normalización O. N. D., NC 246-Determinación de la resistencia a la compresión con el uso de Esclerómetros Tipos N y NR, 2003.
Normalización O. N. D., NC/ISO 1920-7-Ensayos no Destructivos al Hormigón Endurecido, 2015.
P. Tejera, and O. Álvarez, Conservación de Edificaciones, La Habana, Cuba: Félix Varela, 2013.
Proceq, Manual de operación 82039201S Datasheet, 2017. https://www.proceq.com/uploads/tx_proceqproductcms/import_data/files/Profometer_Operating%20Instructions_Spanish_high.pdf
Normalización O. N. D., NC 192-Hormigón hidráulico-Cálculo de la resistencia característica real a la compresión, 2007.
Y. Socarrás-Cordoví, L. Rodríguez and R. Balart Casas Interview, Cuba, Dec. 2018.
Proceq, Using Excel to determine Sonreb curve coefficients, 2018. https://www.yumpu.com/en/document/read/14104870/1-using-excel-to-determine-sonreb-curve-coefficients-proceq
P. Helene, and F. Pereira, Rehabilitación y mantenimiento de estructuras de concreto, Sao Paulo: Brasil, 2007.
F. Contreras, “Validación de escorias de horno de arco eléctrico mediante su uso como adición en hormigón,” Doctoral Thesis, Universidad de Málaga, Spain, 2017.
E. Chávez, T. Pérez, J. Reyes, and F. Corvo, “Deterioration of concrete structures due to carbonation in tropical marine environment and accelerated carbonation chamber,” Revista Técnica de la Facultad de Ingeniería Universidad del Zulia, vol. 36 (2), pp. 104-113, Agu. 2013.
B. Lewicki, Edificios de viviendas prefabricadas con elementos de grandes paneles, Polonia: Arkady, 1968.
Downloads
Published
How to Cite
Issue
Section
License
All articles included in the Revista Facultad de Ingeniería are published under the Creative Commons (BY) license.
Authors must complete, sign, and submit the Review and Publication Authorization Form of the manuscript provided by the Journal; this form should contain all the originality and copyright information of the manuscript.
The authors who publish in this Journal accept the following conditions:
a. The authors retain the copyright and transfer the right of the first publication to the journal, with the work registered under the Creative Commons attribution license, which allows third parties to use what is published as long as they mention the authorship of the work and the first publication in this Journal.
b. Authors can make other independent and additional contractual agreements for the non-exclusive distribution of the version of the article published in this journal (eg, include it in an institutional repository or publish it in a book) provided they clearly indicate that the work It was first published in this Journal.
c. Authors are allowed and recommended to publish their work on the Internet (for example on institutional or personal pages) before and during the process.
review and publication, as it can lead to productive exchanges and a greater and faster dissemination of published work.
d. The Journal authorizes the total or partial reproduction of the content of the publication, as long as the source is cited, that is, the name of the Journal, name of the author (s), year, volume, publication number and pages of the article.
e. The ideas and statements issued by the authors are their responsibility and in no case bind the Journal.