Skip to main navigation menu Skip to main content Skip to site footer

Morphological and structural characterization of ceramic shell waste in the investment casting process in FASAB Sogamoso

Abstract

The structural characteristics and the crystalline parameters of the waste material in the process of investment casting in the Military Industry (INDUMIL for its acronym in Spanish) Factory Santa Barbara are reported. By performing standard laboratory tests such as Optical Microscopy, Scanning Electron Microscopy (SEM) and X-ray Diffraction (XRD), particle size distribution, porosity and fractures present are identified. In addition, a qualitative and quantitative analysis of mineral phases is performed by determining the major phase and comparing the phases present in the original feedstock. Finally,
based on information obtained, possible uses that may have the material under study are proposed.

Keywords

silica sands, investment casting process, microstructure, crystallinity, amorphous structure

PDF (Español)

References

  • Pattnaik, S., Karunakar, D. B., & Jha, P. K. (2012). Developments in investment casting process—A review. Journal of Materials Processing Technology,212(11), 2332–2348.
  • Doi: https://doi.org/10.1016/j.jmatprotec.2012.06.003
  • Bilurbina, L. & Liesa, F. (2000). Materiales no metálicos resistentes a la corrosión. Barcelona: Marcombo.
  • Callister, W. (1996). Introducción a la ciencia e ingeniería de los materiales. Barcelona: Reverté.
  • Callister, W. (2007). Materials science and engineering. New York: John Wiley & Sons.
  • Carter, R. (2004). ¿Does investment permeability impact jewelry castings? Proceedings of The Eighteenth Santa Fe ymposium on Jewelry. New México-USA: Eddie Bell.
  • Jain, V. (2012). Micromanufacturing processes. Boca Raton, FL: CRC Press. Doi: https://doi.org/10.1201/b13020
  • Londo-o, C., Baquero, A. & Córdoba, E. (2014). Evaluación del efecto de la distribución del tama-o de poros sobre la permeabilidad y la textura de moldes cerámicos utilizados en el proceso de microfundición. Revista Colombiana de Materiales,5, 238-243.
  • Mckeer, I. (2004). Stone-in-place casting: the investment perspective. Proceedings of The Eighteenth Santa Fe Symposium on Jewelry. New México-USA: Eddie Bell.
  • Medina, J. (2010). Estudio de las fases amorfas y anocristalinas del sistema Fe2Zr obtenidas por técnicas de mecanosíntesis. Perú: Universidad Nacional Mayor de San Marcos.
  • Merino, L. & Morales, J. (2008). Relación del índice de cristalinidad (IC) con la edad y el contenido de iones F y CO3 en muestras de vertebrados fósiles. Estudios Geológicos, 64(1), 75-87.
  • Perea, A. (2001). El tesoro visigodo de Guarrazar. Madrid: Consejo Superior de Investigaciones Científicas.
  • Rochow, E. (2007). An introduction chemistry of the Silicones, S.l.: Macnutt Press.
  • Vian, A. (2012). Introducción a la química industrial (2a. ed.). Barcelona: Reverté.
  • Wilson, J. & Buffa, A. (2003). Física. (5 ed.). México:Pearson

Downloads

Download data is not yet available.