Physical modelling in reduced dimensions of contention walls made of reinforced earth by Geo-textile
Abstract
A machine wasbuilt with the purpose to try physical modelling by making reinforced earth retaining walls with geo-textile. The machine reinforced earth retaining walls with geo-textile. The machine consists in a prismatic steel frame with steel sheet walls, including one in acrylic. The models was used sand out of washed rock, and as reinforcement was used an especial fabric, which underwent the standard testing in the factory PAVCO. The model 0.80 m long and 0.20 m wide, full of sand reinforced with the fabric. A total of 6 models were made whith different thickness of reinforced layer. The models were subject to a comprension load, and during the loading process it was observed the failure mechanism and stress-displacement behavior.Keywords
reinforced earth, geotextile, physical, modelling, retaining wall
References
- Centeno, F. (1985): Ingeniería biotécnica y bioingeniería de suelos XVII, seminario venezolano de geotecnia, Caracas.
- Das, B. (1999): Principios de ingeniería de cimentaciones, California, Thompson.
- Holtz, R. y Lee, W. (2002): Internal stability analyses of geosynthetic reinforced retaining wall, Research report, agreement N°. T9903, Task 95, Washington D.C., Washington State transportation center.
- López, C. (1999): Manual de estabilización y revegetación de taludes, Madrid, Entorno gráfico, S.L.
- Rodríguez, E. y Rincón, C. (2001): Modelación fisica en centrífuga de excavación sostenida con muro pantalla, Tesis de maestría en ingeniería civil, departamento de ingeniería civil, departamento de ingeniería civil y ambiental, Universidad de los Andes.
- Súarez, J. (2004): Diseño de muros de suelo reforzados con geosintéticos, Bucaramanga, publicaciones UIS.
Downloads
Download data is not yet available.