Design of a logic and programmable controller based on the motorola microcontroller
Supporting Agencies
Universidad Pedagógica y Tecnológica de Colombia, Escuela de Ingeniería Electrónica.
![](https://revistas.uptc.edu.co/public/journals/9/cover_article_832_es_ES.jpg)
Abstract
This article, present the results archieved in the design of a PLC based on a microcontroller. using the norms of electromagnetic compatibility. A design of sofware and hardware was carried out and this design was implemented in an industrial atmosphere, obtaining very good results, in front of the electromagnetic noise characteristic of the industrial atmosphere.Keywords
Programmable robot, microcontroller, reburning, electromagnetic compatibility
References
- Catherwood, Mike. (1999): Designin for electromagnetic compatibility (EMC) with HCMOS microcontrollers. Obtenido el 22 de abril de 2005, disponible en www.freescale.com
- Glenewinkel, Mark. (2002): System design and layout techniques for noise reduction in system MCU. Aplication Note AN1259. Obtenido el 10 de abril de 2005, de www.freescale.com.
- T.C. Lun (2002): Designing for board level electromagnetic compatibility. Motorola aplication note AN2321. Obtenido el 20 de noviembre de 2004, de www.freescale.com.
- Bacells, Joseph, (1997): Autómatas programables, Editorial Marcombo, Barcelona.
- Balcells, Joseph, (1998): Interferencias electromagnéticas en sistemas electrónicos. Editorial Alfaomega, Barcelona, pp. 85-166.
Downloads
Download data is not yet available.