Medición de las formas de onda en la caracterización de dispositivos de microondas: impacto en el diseño de amplificadores de potencia

Autores/as

  • Roberto Quaglia School of Engineering, Cardiff University<, Cardiff, UK
  • James Bell School of Engineering, Cardiff University<, Cardiff, UK
  • Steve Cripps School of Engineering, Cardiff University<, Cardiff, UK
  • Paul Tasker School of Engineering, Cardiff University; Cardiff-UK.

DOI:

https://doi.org/10.19053/1900771X.v16.n2.2016.5442

Palabras clave:

electrónica de alta frecuencia, sistemas de medición de microondas, amplificadores de potencia

Resumen

Este artículo describe un ejemplo de setup, para la medición de las formas de onda durante la caracterización load-pull de un dispositivo de microondas con alta capacidad de potencia. La significancia de está característica de la medición, se resalta al estudiar la forma en la cual puede ser utilizada, en el diseño de amplificadores de microndas con altas potencias de salida y alta eficiencia.

Descargas

Los datos de descargas todavía no están disponibles.

Referencias

Cripps, S. (2006). RF power amplifiers for wireless communications. Boston, MS: Artech House Microwave Library.

Colantonio, P., Giannini, F., Limiti, E. (2009). High efficiency

RF and microwave solid state power amplifiers. Chichester, UK: John Wiley & Sons. DOI: http://dx.doi.org/10.1002/9780470746547

Teppati, V., Ferrero, A., Sayed, M. (2013). Modern

RF and Microwave Measurement Techniques.Cambridge, UK: The Cambridge RF and Microwave Engineering Series. DOI: http://dx.doi.

org/10.1017/CBO9781139567626

Benedikt, J., Gaddi, R., Tasker, P. J. , Goss, M. (2000). High-power time-domain measurement system with active harmonic load-pull for high-efficiency base-station amplifier design. IEEE Transactions

on Microwave Theory and Techniques. Vol. 48, no. 12, pp. 2617-2624. DOI: http://dx. doi.org/10.1109/22.899021

Camarchia, V., Teppati, V, Corbellini, S., Pirola, M. (2007). Microwave Measurements Part II Non-linear Measurements. IEEE Instrumentation Instrumentation & Measurement Magazine. Vol. 10, no. 3, pp. 34-39. DOI: http://dx.doi.org/10.1109/

MIM.2007.4284255

Cripps, S.C., Tasker, P. J., Clarke, A. L., Lees, J., Benedikt,

J. (2009). On the Continuity of High Efficiency Modes in Linear RF Power Amplifiers. IEEE Microwave and Wireless Components Letters.

Vol. 19, no. 10, pp. 665-667. DOI: http://dx.doi.

org/10.1109/LMWC.2009.2029754

Raab, F.H. (1997). Class-F power amplifiers with maximally flat waveforms. IEEE Transactions on Microwave Theory and Techniques. Vol. 45, no. 11, pp. 2007-2012. DOI: http://dx.doi. org/10.1109/22.644215

Carrubba, V., et al. (2010). The Continuous Class-F Mode Power Amplifier. Proceedings of the European Microwave Integrated Circuits Conference (EuMIC). Paris, 2010, pp. 432-435.

Colantonio, P., Giannini, F., Leuzzi, G., Limiti, E. (2000). High efficiency low-voltage power amplifier design by second-harmonic manipulation. International Journal of RF and Microwave

Computer-Aided Engineering. Vol. 10, no. 1, pp. 19–32. DOI: http://dx.doi.org/10.1002/(SICI)1 099-047X(200001)10:1<19::AID-MMCE4>3.0. CO;2-G.

Takayama, Y. (1976). A New Load-Pull Characterization

Method for Microwave Power Transistors. IEEE-MTT-S International Microwave Symposium. Cherry Hill, NJ, USA, 1976, pp. 218-220. DOI: http://dx.doi.org/10.1109/mwsym.1976.1123701

Descargas

Publicado

2016-07-08

Cómo citar

Quaglia, R., Bell, J., Cripps, S., & Tasker, P. (2016). Medición de las formas de onda en la caracterización de dispositivos de microondas: impacto en el diseño de amplificadores de potencia. Ingeniería Investigación Y Desarrollo, 16(2), 6–11. https://doi.org/10.19053/1900771X.v16.n2.2016.5442

Métrica