Skip to main navigation menu Skip to main content Skip to site footer

Assessment of mechanical response of natural asphalt using ambient temperature samples from Caquetá, Colombia

Abstract

The aim of this research was to evaluate the mechanical behavior of natural asphalt by making samples at ambient temperature. It was made a material characterization testing, using quantitative extraction of bitumen to know the asphalt content in the material. Then, it was proceeded to fabricate samples with pure natural asphalt in the gyratory compactor, and finally, samples were assayed by indirect tensile strength test in dry and wet conditions to know the viability of its use in tertiary roads without being subjected to high temperatures in manufacturing and mixing. The main result is evidence that the specimens fabricated at room temperature have very low resistance, so it is necessary to test the addition of stone aggregates at the same temperature and asphalt emulsions.

Keywords

natural asphalt, indirect tensile strength test, flexible pavements.

PDF (Español)

Supplementary File(s)

Sin título (Español)

Author Biography

Luis Angel Moreno-Anselmi

Docente Tiempo completo


References

  1. Barbosa, S. L. (2003). Ensayos de composición química, adherencia, compactación y resistencia. Universidad de Los Andes.
  2. Berry, P. L., & Reid D. (1993). Mecánica de Suelos. Vol. I. México D.F., México: Noriega Editores.
  3. Instituto Nacional de Vías-INVIAS. (1997). Especificaciones técnicas. Bogotá, Colombia: Editorial Escuela Colombiana de Ingeniería.
  4. Osborn, J. Improved pavement material.U.S.,WO2002010285 A1. Febrero 07 de 2002.PCT/US2001/023515, julio 27 de 2000.
  5. Rohde, L.; Pereira, J. A.; Pérez, W.; & Vitorello, T. (2008). Using APT and laboratory testing to evaluate the performance of high modulus asphalt concrete for base courses in Brazil. En Proceedings of the 3rd International Conference on Accelerated Pavement Testing. Congreso llevada a cabo en Madrid, España.
  6. Rondón, H. A., & Reyes, F. A. (2012). Evaluación de las propiedades mecánicas de una mezcla densa en caliente modificada con asfaltita. Revista de Ingeniería, 36, 12-19. Recuperado de: http://www.redalyc.org/pdf/1210/121025826002.pdf DOI: https://doi.org/10.16924/revinge.36.2
  7. Ruíz, J., Reyes, O., & Moreno A. (2013). Estudio del comportamiento de asfaltitas provenientes de Caquetá en mezclas asfálticas de granulometría densa. En: XIX Simposio Colombiano sobre Ingeniería de Pavimentos. Simposio llevado a cabo en la Universidad Piloto de Colombia, Bogotá, Colombia.
  8. Spielmann, P. E. (2000). Asphalt Roads. Londres, Reino Unido: Edward Arnold & Co.
  9. Vázquez, I. (2010). Ventajas y desventajas del uso de polímeros en asfaltos (Tesis de pregrado) Universidad Veracruzana, Veracruz, México.

Downloads

Download data is not yet available.

Similar Articles

1 2 3 > >> 

You may also start an advanced similarity search for this article.