Skip to main navigation menu Skip to main content Skip to site footer

Testing and analysis of a D-STATCOM prototype connected to the electrical network

Abstract

In this article Flexible AC Transmission Systems (FACTS) devices  are addressed, especially the design and implementation of a D-STATCOM prototype, making a comparison between the theoretical behavior and the aforementioned prototype. A fuzzy logic-based strategy was used for voltage control, employing the Matlab Fuzzy Logic Designer tool. The neural network was trainned with the network voltage, the voltage of the inverter stage, the current, the active and reactive power, and the power factor as inputs. Initially, the load power factor was 0.62 and the prototype operation allowed the voltage to be increased above the grid voltage, which is reflected in the forward current, modifying the power factor to a value of 0.91 while maintaining the same voltage. Finally, the results demonstrate the relationship between the increase of the inverter stage of the prototype above the electrical power line, obtaining a variable capacitor thus adjusting the power factor.

Keywords

D-STATCOM, FACTS, fuzzy control, synchronization

PDF

Author Biography

Mauricio José Triana-Figueroa

Ingeniero Eléctrico, Magíster en Controles Industriales.

Jorge Luís Díaz-Rodríguez

Ingeniero Electricista, Magíster en Automática.

Aldo Pardo-García

Ingeniero Electricista, Doctor en Ciencias


References

Downloads

Download data is not yet available.

Similar Articles

<< < 1 2 3 

You may also start an advanced similarity search for this article.